ConductScience.org, home

Trial · NCT01100944

Registered outcomes21

Each outcome the trial registered, primary first, in ClinicalTrials.gov's words.

ListOutcomeTime frameDescription
PrimaryMaximum Tolerated Dose (MTD) of Belinostat2 years
The MTD is defined as the highest dose at which less than 2 out of 6 patients experienced a dose limiting toxicity (DLT). A DLT is defined as grade 4 neutropenia lasting more than 7 days despite prophylactic or therapeutic use of granulocyte colony-stimulating factor (G-CSF), febrile neutropenia defined as absolute neutrophil count (ANC) less than 1000/mm(3) and temperature more than 38.5 degrees Celsius or 100.4 degrees Fahrenheit or life threatening sepsis, grade 4 thrombocytopenia or grade 3 thrombocytopenia associated with bleeding during the first cycle of therapy. Any grade 3 or 4 non-hematologic toxicity was considered dose limiting with the following exceptions: grade 3 diarrhea lasting less than 48 hours, grade 3 nausea and/or vomiting lasting less than 48 hours, grade 3 electrolyte abnormalities lasting less than 48 hours, grade 3 creatinine elevation lasting less than 48 hours.
PrimaryNumber of Participants With Grade 3 and 4 Dose Limiting Toxicity (DLT) at 2000mg/m(2) Belinostatup to 122 months
A DLT is defined as grade 4 neutropenia lasting more than 7 days despite prophylactic or therapeutic use of granulocyte colony-stimulating factor (G-CSF), febrile neutropenia defined as absolute neutrophil count (ANC) less than 1000/mm(3) and temperature more than 38.5 degrees Celsius or 100.4 degrees Fahrenheit or life threatening sepsis, grade 4 thrombocytopenia or grade 3 thrombocytopenia associated with bleeding during the first cycle of therapy. Any grade 3 or 4 non-hematologic toxicity was considered dose limiting with the following exceptions: grade 3 diarrhea lasting less than 48 hours, grade 3 nausea and/or vomiting lasting less than 48 hours, grade 3 electrolyte abnormalities lasting less than 48 hours, grade 3 creatinine elevation lasting less than 48 hours.
Primary
Objective Response Rate (Partial Response (PR) + Complete Response (CR) of Belinostat in Combination With Cisplatin, Doxorubicin and Cyclophosphamide in the First Line Treatment of Patients With Advanced Thymic Malignancies
43 months
Objective response rate is the number of participants with a best objective response of partial response (PR) + complete response (CR) per the Response Criteria in Solid Tumors (RECIST) divided by the number of participants who had treatment.
SecondaryNumber of Participants With Serious and Non-serious Adverse Eventsup to 122 monthsHere is the number of participants with serious and non-serious adverse events. For a detailed list of events, see the adverse event module.
SecondaryTreatment-related Grade 3 and 4 Adverse Events (Highest Grade Per Event Per Patient)up to 122 monthsHere are the number of patients with treatment -related grade 3 and 4 adverse events (highest grade per event per patient).
SecondaryClinical Response43 months
Response is defined by the Response Evaluation Criteria in Solid Tumors (RECIST). Complete response (CR) is disappearance of all target lesions. Any pathological lymph nodes (whether target or non-target) must have reduction in short axis to \<10 mm. Partial response (PR) is at least a 30% decrease in the sum of the diameters of target lesions, taking as reference the baseline sum diameters. Progressive disease (PD) is at least a 20% increase in the sum of the diameters of target lesions, taking as reference the smallest sum on study (this includes the baseline sum if that is the smallest on study). In addition to the relative increase of 20%, the sum must also demonstrate an absolute increase of at least 5 mm. (Note: the appearance of one or more new lesions is also considered progressions). Stable disease (SD) is neither sufficient shrinkage to qualify for PR nor sufficient increase to qualify for PD, taking as reference the smallest sum diameters while on study.
SecondaryDisease Control Rate (DCR)43 monthsDCR is defined as stable disease (SD) + partial response (PR) + complete response (CR) per the Response Criteria in Solid Tumors (RECIST).
SecondaryTime to ResponseFrom the first day of treatment until the date of first documented response, assessed up to 43 monthsTime to response is the time between the first day of treatment until first date of response (complete response (CR) + partial response (PR)) (whichever is first recorded).
SecondaryDuration of ResponseFrom the time of first response until date of progression, assessed up to 43 months
Duration of response is measured from the time measurement criteria (e.g. Response Evaluation Criteria in Solid Tumors (RECIST)) are met for complete response (CR) or partial response (PR) (whichever is first recorded) until the first date that recurrent or progressive disease is objectively documented (taking as reference for progressive disease the smallest measurements recorded since the treatment started).
SecondaryProgression Free Survival (PFS)Start of treatment to time of disease progression or death whichever occurs first, assessed up to 43 monthsDuration of time from start of treatment to time of progression or death whichever occurs first.
SecondaryOverall Survival (OS)Start of treatment to time of death, assessed up to 43 monthsOverall survival is defined as the on-study date until the date of death or progression as appropriate.
SecondaryTime to Half Life (t1/2) of Belinostaton day 1: pre-belinostat and 0, 0.5, 1 and 2 hours after belinostat infusion, on day 3: 0, 0.8, 0.25, 0.5, 1, 2, 4, 6, 8, 12, and 24 hours post-last belinostat dose.Half life is the duration of time for the drug to be reduced to half the original amount.
SecondaryTotal Clearance (CL) of Belinostaton day 1: pre-belinostat and 0, 0.5, 1 and 2 hours after belinostat infusion, on day 3: 0, 0.8, 0.25, 0.5, 1, 2, 4, 6, 8, 12, and 24 hours post-last belinostat doseClearance is the amount of time for the drug to be eliminated from the body.
SecondaryMaximum Observed Plasma Concentration (Cmax) of Belinostaton day 1: pre-belinostat and 0, 0.5, 1 and 2 hours after belinostat infusion, on day 3: 0, 0.8, 0.25, 0.5, 1, 2, 4, 6, 8, 12, and 24 hours post-last belinostat dose
Plasma concentrations of Belinostat were measured using a newly designed and validated ultra high-performance liquid chromatography (HPLC) with tandem mass spectrometric (MS/MS) assay, with a lower limit of quantification of 5ng/mL.
SecondaryMaximum Plasma Concentration (Cmax)/Doseon day 1: pre-belinostat and 0, 0.5, 1 and 2 hours after belinostat infusion, on day 3: 0, 0.8, 0.25, 0.5, 1, 2, 4, 6, 8, 12, and 24 hours post-last belinostat dose
Plasma concentrations of Belinostat were measured using a newly designed and validated ultra high-performance liquid chromatography (HPLC) with tandem mass spectrometric (MS/MS) assay, with a lower limit of quantification of 5ng/mL.
SecondaryTime to Maximum Plasma Concentration (Tmax)on day 1: pre-belinostat and 0, 0.5, 1 and 2 hours after belinostat infusion, on day 3: 0, 0.8, 0.25, 0.5, 1, 2, 4, 6, 8, 12, and 24 hours post-last belinostat doseTime to reach peak concentration after drug administration.
SecondaryArea Under the Plasma Concentration vs. Time Curve Extrapolated to Infinity (AUC(INF))on day 1: pre-belinostat and 0, 0.5, 1 and 2 hours after belinostat infusion, on day 3: 0, 0.8, 0.25, 0.5, 1, 2, 4, 6, 8, 12, and 24 hours post-last belinostat doseAUC is a measure of the serum concentration of Belinostat over time. It is used to characterize drug absorption.
SecondaryArea Under the Plasma Concentration vs. Time Curve Extrapolated to Infinity (AUC(INF)/Doseon day 1: pre-belinostat and 0, 0.5, 1 and 2 hours after belinostat infusion, on day 3: 0, 0.8, 0.25, 0.5, 1, 2, 4, 6, 8, 12, and 24 hours post-last belinostat doseAUC is a measure of the serum concentration of Belinostat over time. It is used to characterize drug absorption.
SecondaryRelative Change Observed in Total Protein Hyperacetylation of Cluster of Differentiation 3 (CD3)+T Cells With BelinostatBaseline Cycle 1 Day 1 (C1D1), Cycle 1 Day 2 (C1D2), Cycle 1 Day 3 (C1D3), and Cycle 2 Day 1 (C2D1)Changes in marker levels from baseline. All pre values were set to 1 so that we could measure changes relative to the baseline.
SecondaryRelative Changes in the Number of Tregs With TreatmentBaseline Cycle 1 Day 1 (C1D1), Cycle 1 Day 2 (C1D2), Cycle 1 Day 3 (C1D3), and Cycle 2 Day 1 (C2D1)Changes in marker levels from baseline. All pre values were set to 1 so that we could measure changes relative to the baseline.

Source ClinicalTrials.govtrials-2026-11-12-0.5.0

Sources 3

  • ClinicalTrials.gov's posted results, through CTTI's AACTFreely available. Acknowledgement requested
  • ClinicalTrials.govNo license stated
  • NIH RePORTER's clinical studies and project filesPublic domain
Each source's terms
  • ClinicalTrials.gov's posted results, through CTTI's AACTClinicalTrials.gov data via Aggregate Analysis of ClinicalTrials.gov (AACT), CTTI. CTTI makes its materials freely available and requests acknowledgement. https://aact.ctti-clinicaltrials.org/documentation/299
  • ClinicalTrials.govnone stated
  • NIH RePORTER's clinical studies and project filesPublic domain (NIH RePORTER)

ClinicalTrials.gov's data carry an international copyright outside the United States: https://clinicaltrials.gov/about-site/terms-conditions.

For software

Read this list from software.

Twenty rows a page, as JSON. No key.

GET https://conductscience.org/api/trials/v1/NCT01100944/registered